Electrochemical Sensor for Sensitive Determination of Ga(III) Ion Based on β‐Cyclodextrin Incorporated Multi‐walled Carbon Nanotubes and Imprinted Sol‐gel Composite Film

A novel sensor for detection of trace gallium ion [Ga(III)] was created by stepwise modification of a gold electrode with β‐cyclodextrin (β‐CD)/multi‐walled carbon nanotubes (MWCNTs) and an ion imprinted polymer (IIP). The sensor surface morphology was characterized by scanning electron microscopy. The electrochemical performance of the imprinted sensor was investigated by cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The sensor displayed excellent selectivity towards the target Ga(III) ion. Meanwhile, the introduced MWCNTs displayed noticeable catalytic activity, and β‐CD demonstrated significant enrichment capacity. A linear calibration curve was obtained covering the concentration range from 5.0×10^?8 to 1.0×10^?4 mol·L^?1, with a detection limit of 7.6×10^?9 mol·L^?1. The proposed sensor was successfully applied to detect Ga(III) in real urine samples.     

Novel surface molecularly imprinted material modified multi-walled carbon nanotubes as solid-phase extraction sorbent for selective extraction gallium ion from fly ash

A new gallium (Ga(III)) ion-imprinted multi-walled carbon nanotubes (CNTs) composite sorbent was synthesized by a surface imprinting technique. The Ga(III) ion-imprinted/multi-walled carbon nanotubes (Ga(III)-imprinted/CNTs) sorbent was characterized by Fourier transform infrared (FT-IR), X-ray diffraction (XRD), nitrogen adsorption experiment, static adsorption experiment, and solid-phase extraction (SPE) experiment. The effects of sample volume, sample pH, washing and elution conditions on the extraction of Ga(III) ion from real sample were studied in detail. The imprinted sorbent offered a fast kinetics for the adsorption of Ga(III). The maximum static adsorption capacity of the imprinted sorbent towards was 58.8 μmol g⁻¹. The largest selectivity coefficient for Ga(III) in the presence of Al(III) was over 57.3. Compared with non-imprinted sorbent, the imprinted sorbent showed good imprinting effect for Ga(III) ion, the imprinting factor (α) was 2.6, the selectivity factor (β) was 2.4 and 2.9 for Al(III) and Zn(II), respectively. The developed imprinted SPE method was applied successfully to the detection of trace Ga(III) ion in fly ash samples with satisfactory results.     

Synthesis and application of multi-walled carbon nanotubes-molecularly imprinted sol-gel composite material for on-line solid-phase extraction and high-performance liquid chromatography determination of trace Sudan IV

A novel composite material of multi-walled carbon nanotubes (MWNTs)-Sudan IV molecularly imprinted polymers (MIPs) was prepared by surface molecular imprinting technique in combination with sol-gel technology. The MWNTs-MIPs were evaluated by scanning electron micrograph (SEM), Fourier transform infrared spectroscopy (FT-IR), and adsorption experiments. The results showed that the MWNTs-MIPs exhibited good selective recognition to Sudan IV. The maximum saturated binding capacity (Q_max) is 63.2 μmol g⁻¹. Applied as sorbent, the MWNTs-MIPs were used for the determination of trace Sudan IV in chilli powder by on-line solid-phase extraction-high-performance liquid chromatography (SPE-HPLC). The results showed that an enrichment factor of 741 was achieved with a loading flow rate of 1.0 mL min⁻¹ for sampling 50 mL. The MWNTs-MIPs provided a fast and convenience determination platform for Sudan IV in real samples.     

溶胶-凝胶法制备红霉素印迹固相萃取材料及其选择性吸附

以红霉素为模板分子,采用溶胶-凝胶印迹技术,合成对红霉素具有特异选择识别性能的印迹聚合材料.采用红外光谱、扫描电子显微镜、热重分析以及比表面积测定技术对印迹聚合物的结构和表面性能进行详细探讨,结果表明所得印迹聚合物比表面积为266.2m2/g,粒径为600nm左右的颗粒材料.选择3种抗生素类药物进行选择吸附研究,结果表明,该聚合物对红霉素的分离因子最高达到2.20.优化固相萃取条件,结果表明用甲醇:乙酸(75:25,V/V)作为洗脱剂时对红霉素的洗脱效果最好.结合液相色谱技术,该印迹材料成功的分离和富集红霉素肠溶片中的红霉素,回收率达到104.5%。     

核-壳型苏丹红Ⅰ印迹聚合物微球制备及应用研究

以苏丹红Ⅰ为模板分子,苯基-三甲氧基硅烷(PTMOS)为功能单体,乙二醇二甲基丙烯酸酯(EGD-MA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用表面分子印迹技术,在自制的SiO2微球表面成功合成了对苏丹红Ⅰ具有良好选择识别性能的核-壳型印迹聚合物。采用红外光谱和扫描电子显微镜对分子印迹微球进行表征,结果表明该印迹聚合材料壳层厚度约为150 nm;采用静态吸附实验研究印迹材料对模板聚合物的吸附性能和选择特性,结果表明以PTMOS为功能单体的印迹聚合物对苏丹红Ⅰ具有优异的选择吸附性,其分离选择因子为2.62。在吸附过程中,模板分子苏丹红Ⅰ与印迹聚合物形成2种结合位点,2种结合位点的解离常数分别为2.30、10.78 mmol/L,最大表观结合量分别为27.40、128.53μmol/g。将该印迹聚合物作为固相萃取材料,对样品进行固相萃取,结合液相色谱技术成功用于辣椒油中苏丹红Ⅰ的测定。     

乙醇-硫酸铵双水相萃取镉-碘化钾-丁基罗丹明B离子缔合物

以紫外-可见分光光度法为检测手段,研究了乙醇-硫酸铵双水相体系萃取镉-碘化钾-丁基罗丹明B的离子缔合物的最佳条件.在0.5mol·L-1 H2SO4介质中,镉-碘化钾-丁基罗丹明B在乙醇-硫酸铵双水相体系中形成稳定的蓝紫色缔合物.Cd2+在0-3μg/10mL范围内呈线性关系,相关系数r=0.9984,表观摩尔吸光系数ε=1.28×106L·mol-1·cm-1.在最佳萃取条件下,离子缔合物的最大萃取率可达98％,Cd2+能与干扰离子Zn2+、Fe3+、Co2+、Cu2+、Ni2+分离完全.该法不仅灵敏度高、选择性好,而且环保、简便快速、分相清晰,无需进行反萃取,具有很强的实用性.     

基于二维声子晶体第一带边态的声学定向辐射

采用多重散射方法研究二维四方钢/水声子晶体中线源的辐射问题。数值结果表明利用声子晶体ΓΜ方向的第一带边态可以实现声定向辐射。利用文中设计的三角形晶体结构既可以实现声波的单束定向辐射,还能够得到传播方向互相垂直的双束定向辐射。该研究对声子晶体功能器件的设计具有一定的意义。     

Optomechanical entanglement in a whispering-gallery cavity

The dynamics of the optomechanical entanglement between optical cavity field modes and a macroscopic mechanical breathing mode in a whispering-gallery cavity as well as the continuous variable entanglement between the phase-quadrature amplitudes of the two whispering-gallery modes have been analysed. Simulated results indicate that under state-of-the-art experimental conditions, optomechanical entanglement is obvious and can occur even at temperatures of above 40 K. Compared with the entanglement of the mechanical oscillator at the ground state temperature, optomechanical entanglement is more intense by several orders of magnitude.     

The Synthesis and Crystal Determination of 3-Hydroxy-4-(4-methoxyphenyl)-5-(2-nitrophenyl)furan-2(5H)-one

Abstract  

The title compound, C₁₇H₁₃NO₆, was synthesized and structurally characterized by elemental analysis, MS, ¹H NMR and single crystal X-ray diffraction. It crystallizes in monoclinic system space group C 2/c with a = 27.981(6) ?, b = 12.996(3) ?, c = 8.0900(16) ?, β = 91.06(3)°, V = 2941.4(10) ?³, Z = 8, R ₁ = 0.0675, wR ₂ = 0.1626, and T = 298(2) K. The X-ray structure determination revealed that the center furanone ring is nearly coplanar with p-methoxybenzene ring and forms a dihedral angle of 87.2(1)° with the nitrobenzene ring. O–H···O Intermolecular hydrogen bonds link pairs of molecules into centrosymmetric dimers, making a graph set motif of R ₂²(10). The dimers are further assembled into a chain of edge-fused R ₄⁴(34) rings running along the [001] direction. The final three-dimensional supramolecular architecture is stabilized by weak π–π interactions.